Configure some Juniper SRX interfaces in switching mode and enable layer 3 routing

 Para configurar ciertos interfaces de un Juniper SRX  en modo Switch para que pertenezca a una VLAN y tengan enrutado L3:

set vlans VLAN_NAME description “Descripción VLAN”
set vlans VLAN_NAME vlan-id 1000
set vlans VLAN_NAME l3-interface vlan.1000
set interfaces vlan unit 1000 family inet address xxx.xxx.xxx.xxx/yy
set interfaces ge-0/0/4 unit 0 family ethernet-switching vlan members 1000
set interfaces ge-0/0/7 unit 0 family ethernet-switching vlan members 1000
set interfaces ge-0/0/10 unit 0 family ethernet-switching vlan members 1000